VSD Intern - Analog Comparator Design using Sky130

VSD Intern - Analog Comparator Design using Sky130

A comparator is a device that compares two analog inputs and outputs a digital signal indicating which input is larger. So it has two analog input terminals and one binary digital output. When the difference between two analog input signals approach zero, noise on the inputs will cause spurious switching of digital output. This rapid change in output due to noise can be prevented by hysteresis. Hysteresis is switching the output high or low at different input signal levels. In place of one switching point, hysteresis introduces two: one for rising edge, and one for falling edge of voltage or current. The difference between the higher-level trip value (VH) and the lower-level trip value (VL) equals the hysteresis voltage (HYST).

A comparator can be divided into three distinctive pieces – a front-end differential amplifier, amplifier stage and output stage.

This comparator consists of

1. Front-end differential amplifier

2. Amplifier of the output from front-end differential sage

3. NAND gate to act as buffer as well as incorporate the enable pin

4. Inverter to act as final buffer before output. The NAND and Inverter improves the slew and provides a little gain.

5. Positive feedback differential set-up.

Various Comparator specifications are listed below:

Propagation Delay -The time difference between the input crossing the reference voltage and the output changing the logic state. Generally, comparators are fast

Input Offset -The difference between the input voltages at the instance where output voltage equals zero volts

Gain–Ideal Comparator has infinite gain and output jumps from low to high at a specific difference in input voltage. Ideal comparators will have a linear transfer curve.

There are multiple other parameters like output swing, Output type, input and output current and impedance but we will focus on above including hysteresis.

This webinar will discuss all design, layout and specification details using ngspice, Xschem and Magic

Comparator Circuit design and layout using Sky130 foundry PDKs

Url: View Details

What you will learn

• Basics of Analog comparator Circuit design and layout
• Integrate Sky130 foundry PDKs with comparator circuit design
• Basics of comparator hysteresis characteristics

Rating: 3.8

Level: Intermediate Level

Duration: 1 hour

Instructor: Kunal Ghosh